build.bvmcontracting.com

Blog

  • Timelapse of New Home Framing

    Timelapse of New Home Framing

    Timelapse of Framing for New Home Build in Toronto

    Have a look at our Time Lapse that shows the early stages of Exterior Construction

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Residential Water Softeners

    Residential Water Softeners

    Home Water Softeners

    The Benefits

    The purpose of a water softener is to remove scale-forming minerals from the water, which are magnesium and calcium, present as calcium carbonate (CaCO3), magnesium hydroxide (Mg(OH)2), and calcium sulfate (CaSO4).. The process of removal is possible through an ion-exchange process with the resin found inside of a water softener. 

    How does a water softener work?

    For those of you who like to lead with “how does…?”, water softeners use tiny cross-linked polymers (called resin, shown below) that are specifically formulated to have exchange sites for ions (specifically sodium, calcium, and magnesium ions). Think of a ball with thousands of spikes, and at the end of each spike there is a sodium ion (to start at least).

    Initially, sodium ions sit on the exchange sites. Because calcium and magnesium ions have more affinity for being attached the the resin exchange sites than a sodium ion, the sodium ion exchanges with them and the ion resin bead now holds onto the magnesium/calcium ions.

    Why is Hard Water Bad?

    The Technical Reason

    Have you ever seen white deposits on the heating exchanger in your hot water tank (tank or tankless)? This is a sign that your water is scaling at the high temperature areas of your home heating appliances, and reduces the ability of the water heater to provide hot water to your home.

      A scaled electrical element from a tank hot water heater
    A scaled electrical element from a tank hot water heater

    Further, if you have any pumps installed (sump pumps or sewage ejectors), you run the risk of scaling the pumps for these systems and causing water to back-up into your basement (which is never a good thing!).

    The Not-so-Technical Reason

    Soft water is generally the easier drinking type of water and also comes with many other benefits (outlined below).

    Regenerating a Water Softener

    Since water softener resin will reach a point during operation where all of the resin beads contain calcium and magnesium ions (see below), the softener will need to periodically regenerate to allow for consistently soft water. The process of regeneration calls for the use of pure salt pellets to be mixed in water to essentially flush away all of the calcium/magnesium ions on the resin beads and recharge them with sodium. The regeneration takes anywhere from 60-90 minutes to complete and requires minimal salt usage (a few bags a month for most households). If the softener is installed correctly, this is usually the only expense that is incurred for owning a water softener.

    Benefits of installing a water softener

    Here are some of the benefits of installing a water softener into your home:

    • Your soap and shampoo will lather better.

    • Your hair and skin will feel noticeably cleaner, softer, and not as dry. Hands will feel softer and look better.

    • No soap scum or mineral deposits to clean off sinks, showers, tubs and toilets.

    • Clothes will be softer, cleaner, whiter and brighter. Plus they will last longer. (Using soft water increases the life of clothing, towels and linens up to 33%).

    • Dishes will clean up more easily, and be spot free, without the gray film glasses get when etched by mineral-laden water.

    • Water-using appliances will last longer and run better. Why? Because hot water heaters, washing machines and dishwashers used with hard water can wear out 30% faster.

    • Keeps heat exchange surfaces clean (if you have a boiler or tankless/on-demand water heating unit) so you can maintain proper energy efficiency in your systems.

    • If you have a sewage ejector installed in your home (many new homes and homes with underpinning require these) the pump that is used will avoid a scale build-up that may back-up the drains from your home.

    Where do you install a water softener in a home?

    Water softeners are installed in-line with your water supply line from the city (after the water meter). Since the water meter is, more often than not, found in a mechanical room that is also where the softener is installed.

    Do water softeners make any noise?

    Since water softeners are simply allowing the city-supplied water to flow through it, the only noise that can be heard is the water that flows through it!

    The Cost of Installing a Water Softener

    This depends on a few factors like the amount of plumbing fixtures, size of your water line, number of people living in your home, and if there is unobstructed access to drains and electrical outlets where your water meter/main water line is located. It would be safe to budget around $1000 to $2000 for the supply and installation of a water softener in your home!

    Any more Questions?

    Feel free to reach out to a BVM Contracting Renovation Consultant to learn more about if a water softener is the right choice for your household!

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Toronto Custom Home Build Tour

    Toronto Custom Home Build Tour

    Tour Interior of New Home Build

    Have a look around the main floor – Kitchen – Living Room – Dining Area.

    The Lower Level is sleek and stylish – the Perfect Family Retreat!

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Mortgage Default Insurance

    Mortgage Default Insurance

    Mortgage Default Insurance

    In Canada, the government has put in place an insurance that makes home-ownership more accessible. Learn more about this insurance below!

    What is Mortgage Default Insurance?

    Mortgage default insurance is a very common and necessary portion of the overall cost of mortgages in Canada. For many people in the Greater Toronto Area, a 20 percent down payment is not feasible due to the high cost of homes, so this insurance is used to allow people better access to the housing market by making a smaller down payment on a home. The insurance allows lenders to keep mortgage interest rates lower than they would be without the default insurance, and protects them should homeowners default or stop making mortgage payments.

    What is the cost of Mortgage Default Insurance?

    The cost of this mortgage default insurance ranges from 2.80 to 4.00 percent of the mortgage amount (Home Price minus down payment), is added to the overall mortgage amount, and differs depending on the size of the down payment received (see below).

    What are the requirements of Mortgage Default Insurance?

    There are some requirements you have to meet in order to qualify for mortgage default insurance:

    • The maximum amortization for insured mortgages is 25 years.

    • If the purchase price is between $500,000 – $999,999 a higher down payment is required. The minimum down payment is 5% of the first $500,000, and 10% of the remaining amount.

    • Mortgage default insurance is not available on homes purchased for more than $1 million; this means that a 20% down payment is required on these homes.

    Where do you get mortgage default insurance?

    There are only three companies that provide this insurance in Canada; Canada Mortgage and Housing Corporation (CMHC), Genworth Financial and Canada Guaranty. All three of these companies charge the same rates for the insurance.

    During the signing of a mortgage, your lender already has the cost of the default insurance worked into the final amount for the mortgage, so you do not have to deal with the insurer. Even when you are completing a purchase plus improvement mortgage, the lender dictates all communication with the insurer.

    Start the conversation!

    A BVM Contracting Renovation Consultant is uniquely positioned to help you navigate the crazy world of mortgages. To learn more about how we help homeowners with finding the right mortgage for their needs please feel free to contact us. Looking forward to starting a conversation.

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Laying a Sub Floor in a Basement

    Laying a Sub Floor in a Basement

    In this video below, we show you how to lay a sub-floor for a basement floor installation. In this case, the client chose engineered hardwood flooring. Most basement floors are either laminate or vinyl, but our client wanted continuity throughout the home, so the basement flooring had to match the flooring on the main and second floors (as well as the open staircases).

    The best sub-floor for hardwood flooring is plywood and when installed in a basement provides a sturdy even surface for the new hardwood floor. It also prevents moisture damage to the new hardwood flooring as you must lay vapour barrier onto the concrete surface prior to the sub-floor installation.

    As they say in the flooring world, your finished flooring is only as good as your sub-floor….

    Laying Subfloor

    Home Addition in Scarborough Bluffs

    Amazing property with wide expansive views – beautiful flowing interior spaces make this an outstanding property.

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Purchase Plus Improvement Mortgage

    Purchase Plus Improvement Mortgage

    Purchase Plus Improvement Mortgage

    Benefits

    A purchase plus improvement mortgage is an option that some mortgage lenders offer homeowners for completing renovations to a property. In essence, the lender (and sometimes the insurer) evaluates the cost of your proposed renovations and then adds that cost to your mortgage. This essentially locks you into adding value to the home which, in many cases, works out for the person buying the property because they were probably going to do those renovations anyway.

    How Much of a Down Payment is Needed?

    You can get qualified for this program with only a 5 % down payment, which makes this program accessible for many people!

    How Much Money Can I Gain Get for Renovations?

    You are eligible for up to 20% of the purchase price of your home, but if the renovations are over $40 000 an appraiser is sent out to look at the property and determine the value of the renovations being completed.

    What are the eligible properties for this Mortgage?

    • Maximum four units with at least one unit occupied as the principal residence.

    • New construction or existing properties.

    • The property of interest must be valued at less than $1 000 000.

    Borrower Qualifications

    The following criteria are used in determining if an applicant(s) qualifies for this type of mortgage:

    Income and Employment

    Standard income and employment verification requirements apply.

    Credit

    • > 80% LTV: At least one applicant is required to have a minimum credit bureau score of 600.

    • ≤ 80% LTV: At least one applicant should have a minimum recommended credit bureau score of 680.

    Down Payment

    Qualified home buyers may use traditional down payment sources including personal savings, RRSP withdrawal, non-repayable gift from immediate family member(s), sweat equity, existing home equity, proceeds from sale of property.

    Government grants may be considered if pre-approved by Genworth Canada.

    Types of renovations approved

    Usually, any renovation that adds value to a home is one that gets approved, but below is a list of renovations that normally get approved for this program:

    • Roof

    • Flooring

    • Wiring

    • Windows and doors

    • Energy efficiency

    • Basement

    • Kitchen

    • Bathroom

    • Living room

    It is important to note that you can also combine any of these renovations as well!

    Step-by-step instructions to Get THIS mortgage

    Step 1: Obtain a Mortgage Pre-approval

    From your mortgage broker (or bank that completes purchase plus improvement mortgages) the first step is to always get pre-approved for the amount that you are looking to take out for the mortgage. This should include the mortgage default insurance and quoted cost of the renovations that you are looking to do to your house of interest!

    This step can be completed after Step 2 but is not recommended.

    Step 2: Find a Home that Needs Fixing and Figure Out Cost of Renovations

    There are many fixer-uppers in Toronto just waiting to be loved! Many young people may be priced out of the majority of the Toronto housing market so being able to find a fixer upper and putting in some renovations to make it your own might make more sense.

    Lenders require that you get written quotes for the scope of renovations that need to be completed from a qualified contractor, which is where we come in! BVM Contracting will be able to provide a quote for any of the above renovations and will be able to help guide you through this process since we have done it before!

    It is important to note that the cost of the renovations added to your mortgage cannot exceed your maximum approval amount.

    It is also worth noting that if the renovations are valued higher than $40 000 that you will need to get an appraiser in to assess the house and verify the costs of renovations. This should be completed before the offer is sent in and accepted, just in case the value of the renovations (and therefore how much money you receive) is less than the quoted amount. This happened with our clients at 93 Prairie Drive but they ended up still moving forward with their offer.

    BVM Contracting has a Renovation Consultation Service tailored to helping people determine the cost of their renovations at this stage of the home buying process. Learn more about this service here.

    Step 3: Put an Offer in on the Home!

    Once you get quotes in and determine that your mortgage plus improvements are less than your pre-approval amount, put an offer in on your fixer-upper home! Once the offer is accepted you will have to provide the renovation quote and the accepted offer for buying the property. Your broker or bank will have the lender approve the mortgage with the outlined costs of the renovation.

    Step 4: Start Your Renovation Engines!

    Once you take possession of your home, you can begin the renovations. Before this happens, ensure that you have the correct building permits in place for doing the work if you are making any large adjustments to the home (structural, plumbing, etc.). With BVM Contracting’s Design-Build Services, we will be able to get you connected with an architect that can help you get the required permits for your renovations.

    The Lender will instruct the Solicitor (Lawyer) to hold the additional Renovation funds for the duration of the project, until the lender confirms the works has been completed. Once the renovations are completed, notify your mortgage broker and they will order an inspection from an appraiser to verify the work outlined in the quoted scope of work is completed as per the quote that was provided by your contractor.

    It is important to start the renovations as soon as you take over ownership if you decide to go with the purchase plus improvement mortgage.

    Step 5: Final Inspection and Disbursement of Funds

    With the inspection completed, the lender will receive the inspection report from the appraiser, and validate that the work has been completed in a good manner and as per the quotes provided. They will instruct the lawyer that they are able to release the funds to you, to pay the contractor. The initial release of funds is 90% of the improvement portion of the mortgage. The remaining 10% is subject to a hold-back pursuant to the construction lien act S. 22. You will be able to get access to the remaining 10% after 45 days, from the date of when the lawyer was told to release the initial 90% of funds.

    Note: Make sure that your contractor knows the timeline for completing the outlined renovations, so that you do not default on getting the funds after the renovations. Usually the timeline is 90-120 days depending on the renovations being completed.

    It is equally important to note that the lawyer will charge a fee to disburse the funds, which is around $150.

    Additional Advice for People Interested in This Mortgage

    Since BVM Contracting has completed renovations with purchase plus improvement mortgage holders, we have in-depth knowledge in how to most efficiently complete these renovations on a tight timeline and budget. We also offer renovation financing to additionally supplement any additional renovations not covered by the purchase plus improvement mortgage.

    Additionally, we have created a case study for our recently completed purchase plus improvement project at 93 Prairie Drive. If you want to learn more about how a real-world couple took advantage of a few different financing options to afford the renovations of their dreams and also subsidize their mortgage with a legal basement apartment.

    If you are interested in getting a quote for your potential renovation of a property feel free to start the conversation by contacting one of our Renovation Consultants or filling out our contact form!

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Enbridge Home Efficiency Rebate Program

    Enbridge Home Efficiency Rebate Program

    Home Efficiency Rebate Program

    Enbridge

    Chances are that if you live in Toronto (or the surrounding area) and own a home you have an account with Enbridge Gas. If you currently are a natural gas customer with Enbridge you can qualify for one of the following rebate or savings programs that allow you to live in a home that is more comfortable and less drafty:

    1. Home Efficiency Rebate Program

    2. Winterproofing Program

    3. Smart Thermostat Purchase Incentive Program

    Below, we talk about the most lucrative program of the three, which is the Home Efficiency Rebate Program. Check out the info below to see if you will qualify for the program, as well as how to get the rebate!

    The HOME EFFICIENCY REBATE PROGRAM

    This program allows homeowners to receive rebates of up to $5000 for eligible energy efficiency upgrades. Before we dive into it we will go over who qualifies for this program.

    How do I qualify?

    • You need to have an Enbridge gas account. If your home isn’t run on Natural Gas you will not qualify.

    • You have to reside in and own a home. Currently condos and other multi-unit apartments are not eligible.

    • To receive the incentive/reimbursement, you must complete at least two eligible upgrades to your home.

    What are the eligible energy efficiency upgrades that I can qualify for?

     Attic Insulation Upgrade
    Attic Insulation Upgrade
     Air sealing upgrade
    Air sealing upgrade
     Basement insulation upgrade
    Basement insulation upgrade
     Exterior wall insulation upgrade
    Exterior wall insulation upgrade
     High-efficiency furnace or boiler upgrade
    High-efficiency furnace or boiler upgrade
     Water heater upgrade
    Water heater upgrade

    Please ensure that you read through each of these upgrades in order to get to know which ones might be the right fit for when you complete your home renovation or upgrades. Even better, through this program Enbridge requires that you complete a home energy assessment for your home to better understand which of these upgrades are eligible and most beneficial to your home. See the below steps on how to complete the audit, as well as the overall process for ensuring that you get access to the rebate and incentive money.

    The process of completing the Home Efficiency Rebate Program

    Follow these steps to ensure that you can get access to the rebate:

    Step 1: Complete an audit of your home with a Registered Energy Advisor (REA). You can schedule your initial energy assessment with any of the approved REA’s show below. When you successfully complete the upgrades, you will be reimbursed $550 for the cost of the pre and post assessments as part of your incentive cheque.

    Step 2: Complete two or more of the recommended upgrades provided by the advisor. As the homeowner, you can work with a general contractor of your choice.

    Step 3: Book your post-renovation energy assessment with the same Register Energy Advisor to validate the work has been completed.

    Step 4: Receive your incentive cheque in 8-10 weeks.

    Other important facts about this program

    • The maximum amount you can receive with this program is $5 000, and that is if you complete all of the above-listed activities. If you are only completing this program and no other renovations to your home BVM Contracting recommends working with your energy advisor to complete the upgrades that will give you the biggest bang for your buck (i.e. attic insulation and air sealing and both low hanging fruit usually).

    • The reason why a Registered Energy Advisor is used for this program is to help add a level of standardization and consistency to the program. You should expect the following from a Registered Energy Advisor

      • Prioritize your upgrades to get the maximum incentive available

      • Help you understand the payback period for the upgrades being considered

      • Reduce air leaks and identify why your house is cold in the winter and hot in the summer

      • Understand your home’s envelope and determine if additional “controlled” air flow is required

      • Determine if energy upgrades were installed as per recommendations

    • Instead of reaching out to Enbridge for this program, just reach out to a Registered Energy Advisor and determine if your qualify. They will be able to determine your eligibility.

    Are you completing Renovations to your home and want to apply for this program?

    If you are interested in this program and are also completing a major renovation to your home (full interior, basement apartment, home addition, etc.) it would be wise to enroll into this program and upgrade as much as possible. You will be working closely with both your General Contractor or Home Builder and Register Energy Advisor in this scenario so make sure you make the most of your investment and maximize your rebate from Enbridge.

    Just make sure that the pre-audit is scheduled before any renovations commence. BVM Contracting has worked with clients completing these rebates and would be able to help with the scheduling.

    Working with a Qualified General Contractor or Home Builder

    Working with a knowledgeable General Contractor or Home Builder in the Greater Toronto Area comes with many benefits, including getting to know where you can save money and how to complete your renovations most efficiently. For any renovation customers that BVM Contracting works with, we complete a complementary review of which rebates and incentives you will have access to based on the proposed home renovations.

    Please contact BVM Contracting if you would like to complete a complementary consultation of your home renovation options and/or ideas, we would love to start the conversation!

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Recirculating Home Shower Systems

    Recirculating Home Shower Systems

    Recirculating Water Showers

    How do you shower for a longer period of time but use less water? Seems a little tricky until you start to understand the science behind recirculating water showers. The technology of recirculating water showers is still very new with only a couple of companies trying to create an industry out of it. Nonetheless, it is still a very exciting idea that, if successful, will lead to a very large reduction in water usage across the world.

    What is a recirculating Water Shower?

    A recirculating water shower is a new technology that is capable of recycling water through a semi-closed loop system for reuse during showers. It was NASA-inspired technology that combated the issue of water scarcity in space. Since water scarcity is also becoming a larger and larger issue on our home planet there is a real-world use-case for this technology. In order for the water to be reused it has to be filtered, cleaned, UV treated, and reheated in order to maintain the correct level of purity and temperature humans enjoy today. In fact, due to the filtration steps in this technology, they claim that the water is more pure than the domestic water supplied to the system, pretty neat!

    Savings numbers for a recirculating water shower

    Supposedly, the savings numbers for this technology are staggeringly high for water and energy. The claim is that this technology can save up to 90% in water and up to 80% in energy compared to a conventional shower system. Since these systems need to operate in a semi-closed manner (sometimes draining to maintain proper levels of purity) that is where the 10% usage of water comes in. The combined savings in water and energy would be pretty awesome for a high use shower system!

    Like any new technology, the cost to manufacture is high

    Since the technology is still fairly new, the cost to supply and install is high. In checking Orbital Systems’ (the current leader in this space) website, they are selling their standard unit for 3 899 pounds (or $6 650 CAD). This is only for the supply of the system. Once the technology gets more commercialized and streamlined this cost will go down, but will still be more expensive than a normal shower.

    Is this product currently available in canada?

    Not yet, but it looks like there are plans to expand to the North American market. So far it looks like only a few European countries have supply chains for the product (Denmark, Sweden, Great Britain).

    Possible applications for when the technology comes to north America

    Where I see this technology thriving at first will be in higher-use shower applications, that is where people will realize a return on investment first. Places like gyms and hockey arenas where there are communal and frequent use of showers. The next area will be in homes that are targeting net-zero or better energy usage. Since the shower saves on both water and energy, this will be a great way to gain the net-zero accreditation for sustainable homes.

    Conclusion

    I cannot wait to see when this technology hits the North American market, and I will try to update the content in this blog once that day comes.

    About Home Innovation Spotlight

    BVM Contracting is committed to finding and writing about innovative technology, products, and services that are transforming the home and construction industry. In order to be the best General Contractor and Home Builder that we can be, it is important to stay in the loop on new trends and give people insight about the fun and exciting things coming to your home in the future!

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • Build Process

    Build Process

    The Building Process

    Home Addition Scarborough

    Minerva Avenue

    One of the challenges on this project was creating a temporary roof or overhang, to protect the structure while the framing was being completed. The right side of the home was being worked on, while the left side (containing bedrooms and bathrooms) had a roof. Thankfully we worked quickly and Mother Nature was on our side, framing and roof installed in record time!

    The lower level of this build has a newly designed kitchen and eating area, complete with walkout to the yard.

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.

  • New Home Build

    New Home Build

    New Home Construction in Markham

    The Build Process

    This project saw us start from the ground up

    Next step is exterior waterproofing

    Framing the structure is now complete – Plumbing and Electrical are also completed so we can begin Interior Finishing

    ABOUT BVM CONTRACTING

    BVM Contracting is a full-service General Contractor or Home Builder located in Toronto. We provide home renovation and building services for major home renovations (kitchen renovations, bathroom renovations, basement renovations, full interior renovations, home additions, and new home construction). Our goal is to help guide our clients through the process of renovating their home, from concept to completion.

    Further than providing General Contracting and Project Management for major home renovations, we also offer value-added services such as renovation financing, renovation rebate consultations and services, building permit and design services, smart home installation services, and real estate investor services.

    To learn more about our offering by visiting our services page.